Giant Scale Twins is pleased to offer the following accessories, with more under development!

1/5th Scale Dummy Radial Engine
Constructed from molded plastic, wire and paint, our dummy radial engine is a great way to dress up your 1/5th scale warbird.  With a little planning, the dummy radial engine can also be used as engine baffling.  Simple to construct and finish, light weight, and inexpensive.  Designed for our F-7-F Tigercat.
$19.95 plus shipping.
IMG_1444s.JPG (352075 bytes)
Patent Pending

Wing Joiner Hardware
Having problems transporting your aircraft because the wings are too long?  On your next project, make the outer panels of the wings removable using our CNC'd aluminum wing joiners!  Developed by Modaire Industries, our wing joiner hardware is simple to install, is extremely tough (milled from T6-6061 grade aircraft aluminum) and is an elegant solution. 
$49.95 per pair plus shipping (1 pair consists of one "left" and one "right").
            
Patent Pending

F-7-F Tigercat 1/5 Scale Main Gear Door Hinges
Scale Gear door hinges for the F-7-F Tigercat! Features "scale" C-shaped hinge arms for hinging around corners, like the main gear doors on the F-7-F Tigercat. CNC Milled from T6-6061 Aluminum.  Includes an "hour glass" shaped phenolic bushing to correct for imperfect hinge alignment and guarantees a smooth and free moving gear door!
$149.99 plus shipping for the complete set (Left and right door hinges for both nacelle's: That's 48 milled aluminum and 12 milled phenolic pieces!)
,           Here's an actual installation photo:   
Patent Pending


F-7-F Tigercat 1/5 Scale Nose Gear Door Hinges
Scale Gear door hinges for the F-7-F Tigercat! Features "scale" C-shaped hinge arms for hinging around corners, like the main gear doors on the F-7-F Tigercat. CNC Milled from T6-6061 Aluminum.  Includes an "hour glass" shaped phenolic bushing to correct for imperfect hinge alignment and guarantees a smooth and free moving gear door!
Also includes a custom milled phenolic block in the shape of the Nose gear strut door for a perfect fit.
$65.00 plus shipping for the complete set.
,           Here's actual installation photo's:   IMG_1427s-2 copy.jpg (50486 bytes)  IMG_1431smaller.jpg (51270 bytes)


F-7-F Tigercat 1/5 Scale Cockpit Kit
$65.00 plus shipping (custom graphics included).  Kit includes dash assembly, yoke, side panels, seat, heat rest panel and controls.
IMG_1396web.jpg (39982 bytes) IMG_1461web.jpg (76430 bytes) IMG_1463web.jpg (77755 bytes)
Patent Pending

AERO COMMANDER 1/4 Scale Cockpit Kit
$125.00 plus shipping (fabric not included, but custom graphics are!)  Kit includes dash assembly, yokes, side panels, window panels, dash glare shield, floor and 6 seats.
  dash panel web.jpg (66507 bytes) IMG_1482web.jpg (53967 bytes) IMG_1484web.jpg (45453 bytes) IMG_1486web.jpg (51659 bytes) IMG_1485web.jpg (50627 bytes)
Patent Pending

 

F-7-F Tigercat 1/5 Scale Ring Exhaust (Fully Functional)
Patent Pending
IMG_1553s.jpg (173951 bytes)  IMG_1554s.jpg (160571 bytes)  IMG_1557s.jpg (110588 bytes) Hear the F-7-F running with RCS150 radials through the exhaust manifolds:
Made from 6061T6 Aluminum, these fully functioning exhaust collector rings can be plumbed into any engine.   The top and bottom mount on the rings are bulkheads, dividing the ring into left and right halves (9 pipes each).  Designed to use one-half of the ring for a single cylinder engine, or both halves for twins (or Radials as shown!).  Exhaust exits 18 pipes in the scale locations (4 top, 4 left, 4 right, 6 bottom), so you won't have to cut any holes in your cowls!  Weight is 0.55 pounds per ring, available in silver or black finish.  Custom input pipe diameter and locations available upon request to suit your engines.  $300 / pair plus shipping.